Influence of Reaction Conditions on the Settling Behavior of Liquid-Liquid Dispersions

The settling behavior of liquid-liquid dispersions at ambient temperature and pressure is well investigated. However, little is known about the settling behavior of those systems at high pressure and high temperature. In this work, a novel stainless steel settling cell is presented, enabling investigations on liquid-liquid settling behavior at high pressures up to 130 bar. The settling behavior of a promising CO₂ hydrogenation reaction system is investigated by sequentially determining influences of dissolved CO₂, side components, and temperature.     

Low temperature ionothermal synthesis of TiO2 nanomaterials for efficient photocatalytic H2 production,dye degradation and photoluminescence studies

The photocatalytic hydrogen generation is a novel, eco-friendly and favourable method for production of green and clean energy using light energy. In this direction, we report low-temperature ionothermal method for the preparation of TiO₂ nanoparticles (NPs) using methoxy ethyl methyl imidazolium tris (pentafluoroethyl) trifluoro phosphate (MOEMINtf₂) as an ionic liquid (IL) at 120°C for 1 day. The synthesized nanomaterials were examined using different spectrochemical methods like UV-DRS, XRD, FT-IR, TEM, BET and TGA-DTA techniques. The mixed phase TiO₂ is obtained with 81.7% of anatase and 18.3% of rutile phase by the XRD studies, and average crystallite size is found to be ∼7 nm. The stretching of Ti-O bond (∼555 cm⁻¹) and few other bands related to ionic liquid were confirmed by FTIR spectrum. The band gap energy was observed to be ∼3.38 eV by UV-DRS analysis. TEM images reveal spherical shape with an average particles size of about 10 nm. Photocatalytic H₂ generation was carried out using TiO₂ NPs and observed the generation of 553 μmol h⁻¹ g⁻¹ via water splitting reaction. Furthermore, the prepared TiO₂ NPs employed for the photocatalytic degradation of methylene blue dye (84.54%), and photoluminescence studies confirms the obtained material can be used in optoelectronic applications with green emission.     

Highly efficient[C8mim][Cl] ionic liquid accompanied with magnetite nanoparticles and different salts for interfacial tension reduction

The 1-octyl-3-methylimidazolium chloride, [C_8 mim][Cl] ionic liquid(IL) was used as a novel surfactant in n-heptane/water system. The interfacial tensions(IFT) were measured and corresponding variations were investigated. An IFT reduction of 80.8% was appropriate under the IL CMC of about 0.1 mol·L~(-1) and stronger effects were achieved when magnetite nanoparticles and salts were present profoundly under alkaline p Hs.The equilibrium IFT data were accurately simulated with the Frumkin adsorption model. Hereafter, the saturated surface concentration, equilibrium constant and interaction parameter were obtained and their variations were demonstrated. Further, emulsion stability and contact angle of oil/water interface over quartz surface were studied. The oil/water emulsion stability was hardly changed with nanoparticles; however, the stability of oil/water + IL emulsions was significantly improved. It was also revealed that the presence of sodium and calcium chloride electrolytes fortifies the IL impact, whereas sodium sulfate weakens. From dynamic IFT data and fitting with kinetic models, it was found that the IL migration toward interface follows the mixed diffusion–kinetic control model. Consequently, the IL diffusion coefficient and the appropriate activation energy were determined.     

Review of composite cathodes for intermediate-temperature solid oxide fuel cell applications

A composite cathode exhibits low activation polarisation by spreading its electrochemically active area within its volume. Composite cathodes enable the development of high-performance electrodes for solid oxide fuel cells (SOFCs) at intermediate temperatures (600 °C – 800 °C) because of their significant role in determining the kinetics of oxygen reduction reaction (ORR). Few anions O²⁻ are transferred through the electrolyte component when the ORR is low, thereby lowering the reaction with cation H⁺ from an anode side to transfer electrons along the outer circuit to the cathode side to participate in ORR. The resistance to the ORR at the cathode is minimised, thereby contributing to performance degradation and efficiency loss in existing SOFCs, especially at intermediate temperatures. The suitability and compatibility of the cathode and electrolyte are crucial in the development of cathodes and electrochemical reactions. The intercomponent compatibility is important to ensure the robustness and durability of SOFCs, especially at an operating temperature around 800 °C, at which the components experience extreme thermal and mechanical stresses. Composite cathodes are used to improve cathode performance. These composite cathodes help enhance the properties of mixed electronic–ionic conductors and the intercomponent compatibility. Herein, we reviewed historical data of composite-cathode development for SOFCs, including its basic principle and criteria. The overall performance of as-synthesised composite cathodes in terms of microstructure, electrochemical reaction and intercomponent compatibility is briefly discussed.     

High-performance sodium polyacrylate nanocomposites developed by using ionic liquid covalently modified multiwalled carbon nanotubes

Ionic liquids grafted with multiwalled-nanotubes (CNT Br/NTf₂), involving hydrophilic bromide salt and hydrophobic bis(trifluoromethanesulphonyl)imide salt, were prepared by amidation, followed by an easy solution-casting method of blending CNT Br/NTf₂ with sodium polyacrylate (PAA) as well as crosslinking agent (XR-100) to form PAA hybrid nanocomposites. The uniform dispersion of CNT Br/NTf₂ were analyzed by TEM. The defects and physical properties of fillers were characterized by Raman spectroscopy, Contact angle test, and TGA. Furthermore, microstructures of hybrid nanocomposites were characterized by SEM, from which it can be found that fillers were homogeneously distributed in the PAA matrix. CNT Br/NTf₂ significantly improved the mechanical properties and tensile fatigue resistance, as well as offered tunable swelling behavior of PAA nanocomposites without wasting too much of thermal stability. This study offers a simple approach to develop multifunctional materials based on ionic liquids covalently modified MWCNTs PAA nanocomposites.     

离子液体水热法辅助合成稀土Ce掺杂ZnO纳米材料的制备及其应用研究

以1-甲基咪唑和氯代正丁烷为原料,合成1-丁基-3-甲基咪唑氯盐离子液体;以醋酸锌[Zn(Ac)2]、硫酸锌(ZnSO4)和氯化锌(ZnCl2)为锌源,在1-丁基-3-甲基咪唑氯盐离子液体和丙氨酸体系中与硝酸铈反应,经水热合成法制备得到Ce掺杂的纳米ZnO。采用扫描电子显微镜(SEM)、紫外-可见光吸收光谱(UV-Vis)、X射线衍射仪(XRD)、X射线光电子能谱分析(XPS)和红外光谱(FT-IR)对产品进行表征。以亚甲基蓝(MB)为目标降解物,采用UV-Vis检测,考察了Ce掺杂的纳米ZnO的光催化活性。研究表明,焙烧温度对光催化的晶体结构和光催化活性产生较大的影响;2%Ce/ZnO、焙烧温度为500℃、催化时间为30 min、亚甲基蓝用量0.05 g、pH值为10时降解率可达99.5%以上。     

Synthesis,characterization and electrochemical properties of La2-xEuxNiO4+δ Ruddlesden-Popper-type layered nickelates as cathode materials for SOFC applications

Eu doped La₂NiO₄ powders, with the general formula La_2-xEu_xNiO_4+δ denoted as LENO_x (for x = 0, 0.2, 0.4, 0.6 and 0.8), were synthesized via the mechanical milling reaction method. The Eu³⁺ doping content has a remarkable influence on structural and electrochemical properties. The phase identification and morphology were studied by X-ray diffraction (XRD), Raman spectroscopy, Infrared spectroscopy (IR), A laser size analyzer and scanning electron microscopy (SEM). Lattice parameters were calculated using the Rietveld method. It was observed that the lattice parameter values in LENO_x systems varied with the amount of Eu³⁺. The latter was symmetrically deposited by spin coating on both surfaces of an Ce_0.8Sm_0.2O_1.9 (SDC) electrolyte and studied using AC impedance spectroscopy. The electrochemical properties were studied using two-probe impedance spectroscopy and results showed that the ASR of LENO_x was enhanced by the Eu³⁺ dopant content x. Results also showed that LNEO_0.2 had the lowest Area specific resistance (ASR) at 700 °C and it was therefore concluded that doping with the appropriate amount of Eu³⁺ can further improve the properties of a nickelate cathode.     

Phosphorylated chitosan/poly(vinyl alcohol) based proton exchange membranes modified with propylammonium nitrate ionic liquid and silica filler for fuel cell applications

In our previous work, phosphorylated chitosan was modified through polymer blending with poly(vinyl alcohol) (PVA) polymer to produce N-methylene phosphonic chitosan/poly(vinyl alcohol) (NMPC/PVA) composite membranes. The aim of this work is to further investigate the effects of a propylammonium nitrate (PAN) ionic liquid and/or silicon dioxide (SiO₂) filler on the morphology and physical properties of NMPC/PVA composite membranes. The temperature-dependent ionic conductivity of the composite membranes with various ionic liquid and filler compositions was studied by varying the loading of PAN ionic liquid and SiO₂-PAN filler in the range of 5–20 wt%. As the loading of PAN ionic liquid increased in the NMPC/PVA membrane matrix, the ionic conductivity value also increased with the highest value of 0.53 × 10^?3 S cm^?1 at 25 °C and increased to 1.54 × 10^?3 S cm^?1 at 100 °C with 20 wt% PAN. The NMPC/PVA-PAN (20 wt%) composite membrane also exhibited the highest water uptake and ion exchange capacity, with values of 60.5% and 0.60 mequiv g^?1, respectively. In addition, in the single-cell performance test, the NMPC/PVA-PAN (20 wt%) composite membrane displayed a maximum power density, which was increased by approximately 14% compared to the NMPC/PVA composite membrane with 5 wt% SiO₂-PAN. This work demonstrated that modified NMPC/PVA composite membranes with ionic liquid PAN and/or SiO₂ filler showed enhanced performance compared with unmodified NMPC/PVA composite membranes for proton exchange membrane fuel cells.     

Alkoxyl side-chain effects of acidic ionic liquids catalysts for the esterification of n-butyl butyrate

Three kinds of alkoxy group-functionalized acidic ionic liquids (ILs) are reported in this work, namely, 1-(methoxyethyl)-3-methylimidazolium hydrogen sulphate [MOE-MIM]HSO₄, 1-(ethyoxyethyl)-3-methylimidazolium hydrogen sulphate [EOE-MIM]HSO₄, and 1-(propyoxyethyl)-3-methylimidazolium hydrogen sulphate [POE-MIM]HSO₄. The short side chain on the cation of [MOE-MIM]HSO₄ decreases the solubility of the IL in butanol and butyric acid and facilitates the separation of the IL from a reaction medium. The yield of butyl butyrate is up to 99.5%. After 10 rounds of recycling, the catalytic performance of [MOE-MIM]HSO₄ shows no significant changes.